pmdc planetary gear motor wholesale In the process of use, it is inevitable that there will be vibration, after all, there is a group of gears in the reducer, so the slight vibration is not relevant. However, if the vibration amplitude is large or affects the normal operation of the equipment, it needs to be handled in time, otherwise it is easy to cause damage to the pmdc planetary gear motor wholesale, and even equipment damage. So, what is the cause of large vibrations in the use of pmdc planetary gear motor wholesale?

1, when the reducer and the motor are combined together, the flange screw is not locked, a similar coupling failure occurs separately, or for various reasons, so that the motor vibrates, and then vibrates to decelerate, so that the pmdc planetary gear motor wholesale produces larger vibration.

2. The output shaft is deformed and the force is uneven during operation. When the strength and hardness of the shaft are lower than the requirements or when the shaft is aging for a long time, the shaft deformation will cause large vibration of the gear motor.

3, pmdc planetary gear motor wholesale internal gear failure. Severe pitting of tooth surface, big gear meshing clearance, severe wear and broken teeth are the main causes of gear damage. Due to excessive load or aging of the gear, these gears will have slight wear, and produce abnormal vibration after slight wear, if you can not find these vibrations in time and deal with them, it will further produce wear, gear wear of the reducer to a moderate degree, planetary reducer deceleration opportunity to aggravate the vibration, so that the reducer motor can not work normally.

4, the connection is damaged, when the reducer is connected together, due to oil leakage and other reasons for damage and screw loosening, the vibration will be transmitted to the planetary reducer, resulting in greater vibration of the planetary reducer.

5, when the bearing wear is serious, the planetary reducer will also occur violent vibration.

6, the motor installation into the force end of the tightening ring screw is not locked, will cause the motor shaft deformation, when the motor runs at high speed, will make the reducer produce huge or violent vibration, serious will cause the motor shaft broken.

pmdc planetary gear motor wholesale https://www.dydzmotor.com/pm-dc-planetary-gear-motor